Raw Materials

Raw materials for your own mixing: plant glycerin (VG, E422) and propylene glycol (PG, E1520) as food-grade pure substances with 99.5% Ph. Eur. purity — tasteless, carry-friendly and the foundation for every flavour mix with the base. Available as single units or sets from POPY TRADE and Ultrabio, for example as POPY TRADE 1 Litre Each Glycerin & Propylene Glycol. If you mix your own flavour recipes, you'll find matching flavours from Shake & Enjoy.

  • POPY TRADE Glycerin and Propylene Glycol 2-pack of 1 litre each, E422 and E1520, 99.5% Ph. Eur. food grade
    €17.99 €39.98
    Contents: 2 l (€9.00 / 1 l)
    In basket
    (4)
  • POPY TRADE set of two bottles with 500 ml each of glycerin E422 and propylene glycol E1520, 99.5% Ph. Eur.
    €14.99 €29.98
    Contents: 1 l (€14.99 / 1 l)
    In basket
  • POPY TRADE Propylene Glycol 300ml E1520 in brown PET bottle with 99.5% purity stated
    €8.99 €12.99
    Contents: 300 ml (€29.97 / 1 l)
    In basket
  • POPY TRADE 700ml Glycerin VG E422 bottle with 99.5% Ph. Eur. purity label and EAN
    €9.99 €17.99
    Contents: 700 ml (€14.27 / 1 l)
    In basket
  • POPY TRADE Glycerin & Propylene Glycol set with 700ml and 300ml pack sizes in two bottles
    €14.99 €29.98
    Contents: 1 l (€14.99 / 1 l)
    In basket
    (1)
  • POPY TRADE propylene glycol PG E1520 bottle with 100 ml contents and 99.5% purity stated
    €8.99 €14.99
    Contents: 500 ml (€17.98 / 1 l)
    In basket
    (1)
  • POPY TRADE vegetable glycerin VG E422 99.5% pure grade in the 100 ml bottle
    €8.99 €14.99
    Contents: 500 ml (€17.98 / 1 l)
    In basket
    (1)

7 Items

Buy raw materials: glycerin and propylene glycol as your base

Raw materials for mixing are two pure substances that work differently: plant glycerin (E422) is thick, binds moisture and brings a slight sweetness, while propylene glycol (E1520) is thin, tasteless and spreads flavours evenly through the mix. Both are approved as food additives in the EU — and these two substances form the standard commercial base for any homemade flavour mix.

Those who mix regularly usually go for sets with one litre each, such as the POPY TRADE 500ml Each Glycerin & Propylene Glycol as a handy starter size, or a one-litre set for ongoing use. A proven compromise for those who prefer thicker mixes is the POPY TRADE 700ml Glycerin & 300ml Propylene Glycol set in a 70/30 ratio.

Uses: from drinks to baking

The base carries flavours across many areas of the kitchen. The raw materials are used in drinks, cocktails and mocktails, shakes, yoghurt and quark, desserts, ice cream, baking, as well as for your own flavour mixes with the base — all without changing the natural taste of the ingredients. Glycerin brings body and texture, propylene glycol ensures the flavour spreads evenly instead of staying locally concentrated.

Outside the kitchen, the substances are also used: as a carrier for flavours, in foods and drinks, in cosmetics and personal care, and in pharmacy. In the popytrade range, the focus is clearly on their role as a carrier for your own food flavour creations. For the flavours themselves, take a look at the Mix & Enjoy range.

Buying criteria: what matters

  • Purity: Look for 99.5% Ph. Eur. / USP — the pharmaceutical purity standard for pure substances.
  • E-number: E422 for plant glycerin, E1520 for propylene glycol — both in food quality.
  • Container size: Single units starting from the small bottle size for beginners, sets with one litre each for regular mixing.
  • Ratio: Freely selectable — 1:1 as a starting point, more glycerin for thicker mixes, more propylene glycol for lighter, free-flowing solutions.

Practical tip: Mix the base first, before adding the flavour — the order matters. Add glycerin and propylene glycol in your desired combination to a clean mixing bottle, seal and shake vigorously until the base is homogeneous. Only then work in the flavour and shake again. This way the taste spreads evenly.

Application in detail: the Shake & Enjoy principle

The process is deliberately simple: prepare the base, work in the flavour, shake, let it rest briefly. After that, the mix carries the taste into drinks, desserts, ice cream or dough. Dosage instructions can be found directly on each flavour product — we don't make up percentage values here, we rely on the manufacturer's specifications.

For storage: keep both raw materials cool, dry and away from light, and reseal the bottles firmly after use. Glycerin, being hygroscopic, would otherwise draw moisture from the air. Practical helpers for accurate measuring are food-grade dosing pipettes or a clean measuring beaker — especially important if you want to keep your batches reproducible.

Who these raw materials are suitable for

The range suits anyone developing their own flavour recipes: beginners making their first homemade syrup, home cooks with a trusted recipe book, and anyone who needs exactly reproducible results. If you only regularly use one of the two substances, order it as a single unit; if you need both at the same time, a set saves time.

Even those who only flavour occasionally are well served by the smaller containers — start small, test different ratios and scale up once your result is right. The manufacturers POPY TRADE and Ultrabio can both be found in the shop under the Ultrabio raw materials.

FAQ

What is the difference between glycerin and propylene glycol?

Glycerin (VG, E422) is thick, plant-derived, moisture-binding and slightly sweet — it brings body and texture to the mix. Propylene glycol (PG, E1520) is thin, tasteless and dissolves flavours evenly without the mixture separating. Both are approved food additives with 99.5% Ph. Eur./USP purity at popytrade. With both on hand, you control the consistency freely — more glycerin for thicker mixes, more propylene glycol for lighter, free-flowing solutions.

How do I mix glycerin and propylene glycol?

Add the desired proportions of both raw materials to a clean mixing bottle, seal it and shake vigorously until the base is homogeneous. A 1:1 ratio works well as a starting point — after that, follow your recipe. Only once the base is ready do you add the flavour — the dosage instructions can be found on each flavour product. Shake again and let it rest briefly, then the mix carries the taste evenly into drinks, desserts, ice cream or dough.

What are the raw materials used for?

Glycerin and propylene glycol are used in foods and drinks, as a carrier for flavours, in cosmetics and personal care, and in pharmacy. In the kitchen they carry mixes for drinks, cocktails and mocktails, shakes, yoghurt and quark, desserts, ice cream and baking — without changing the natural taste of the ingredients. If you mix your own recipes, the best starting point is the POPY TRADE 1 Litre Each Glycerin & Propylene Glycol as a base stock.

Loading...